Mountaineer V8-302 5.0L VIN P EFI (1998)
^
^
FAX
Please be prepared to provide the following information:
^
Dealer Name and P & A code
^
Contact Name
^
Phone number and E-mail address
^
FSA #: 03804
^
Vehicle Identification Number (if requested)
DEALER PRICE
For latest prices1 refer to DOES II.
PARTS RETENTION AND RETURN
Follow the provisions of the Warranty and Policy Manual for "Parts Retention and Return Procedures".
EXCESS STOCK RETURN
Excess stock returned for credit must have been purchased from Ford Customer Service Division in accordance with Policy Procedure Bulletin 4000.
Attachment III - Technical Information
OVERVIEW
This procedure involves replacement of certain seat recliner assembly attaching hardware on two different style driver seat assemblies. The driver seat
will have either a stamped seat back frame or a tubular seat back frame. These seats can be distinguished from one another by slightly lifting the seat
back cover and viewing the corner of the seat back frame itself. See Figures 1 and 2.
^
Tubular seatback frames can be identified by a hole in the lower flange where the recliner mechanism attaches to the seatback frame. See Figure 1.
