Mountaineer V8-302 5.0L VIN P EFI (1998)
5. Rotate the disc brake caliper upward.
6. Remove the pads and the stainless slippers.
1
Remove the pads.
2
Remove the stainless slippers.
7. Measure the front disc brake rotor for minimum thickness.
-
Replace the front disc brake rotor if not within specifications.
8. If necessary, resurface the front disc brake rotor. Ford recommends on-vehicle rotor machining. Follow the lathe manufacturer's instructions.
9. Inspect the disc brake caliper for leaks.
-
If leaks are found, disassembly is required.
INSTALLATION