Mountaineer V8-302 5.0L VIN P EFI (1998)
Brake Pad: Service and Repair
Rear
REMOVAL
1. Inspect the brake pads for wear or contamination. Replace if worn or past specification.
2. Remove the rear disc brake caliper.
NOTE: It is not necessary to remove the rear wheel brake hose when performing this procedure.
3. Remove the brake pads.
CAUTION: Do not allow grease, oil, brake fluid or other contaminants to contact the brake pads.
4. Retract the caliper piston into the rear disc brake caliper
5. Remove the slippers.