Mountaineer V8-302 5.0L VIN P EFI (1998)
6. On 2-door vehicles, install the brake pressure control valve.
7. On cruise control-equipped vehicles, install the brake pressure switch.
NOTE: Use clean High-Performance DOT 3 Brake Fluid C6AZ-19542-AB or equivalent DOT 3 fluid meeting Ford specification
ESA-M6C25-A; fill brake pressure switch.
8. Install the brake master cylinder reservoir.
9. Install the brake master cylinder.
NOTE: Bleed the brake master cylinder prior to installation.
10. Fill the brake master cylinder reservoir and install the brake master cylinder filler cap.
11. Bleed the brake system.
Removal and Installation
REMOVAL
WARNING: BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES. WASH
HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING WATER FOR 15
MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK WATER AND INDUCE
VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
