mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Brake Master Cylinder > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 7016
Page 2
background image

1. To install, reverse the removal procedure.

WARNING:  BRAKE FLUID CONTAINS POLYGLYCOL ETHERS AND POLYGLYCOLS. AVOID CONTACT WITH EYES.
WASH HANDS THOROUGHLY AFTER HANDLING. IF BRAKE FLUID CONTACTS EYES, FLUSH EYES WITH RUNNING
WATER FOR 15 MINUTES. GET MEDICAL ATTENTION IF IRRITATION PERSISTS. IF TAKEN INTERNALLY, DRINK
WATER AND INDUCE VOMITING. GET MEDICAL ATTENTION IMMEDIATELY.
 

CAUTION:  

-

Brake fluid is harmful to painted and plastic surfaces. If brake fluid is spilled onto a painted or plastic surface, immediately wash it with
water.

-

After the EHCU is installed, it is necessary to bleed the hydraulic brake system.

NOTE:  When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven l6 km (10 mi) or more to relearn the strategy

Brake Master Cylinder > < Hydraulic Control Assembly - Antilock Brakes|Specifications|Page 7016