mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Compression Check|System Diagnosis > < Vehicle Lifting|Jacking|Page 2773
Page 1
background image

Compression Check: Specifications

The indicated compression pressures are considered within specification if the lowest reading cylinder is within 75 percent of the highest reading.
Refer to the Compression Pressure Limit Chart.

If one or more cylinders reads low, squirt approximately one tablespoon of clean engine oil meeting Ford specification WSS-M2C153-G on top of
the pistons in the low-reading cylinders. Repeat the compression pressure check on these cylinders.

Compression Check|System Diagnosis > < Vehicle Lifting|Jacking|Page 2773