Mountaineer V8-302 5.0L VIN P EFI (1998)
Valve Spring: Testing and Inspection
Strength
1. Use Valve/Clutch Spring Tester to check the valve springs for proper strength at the specified valve spring length. Replace the valve spring if it
does not meet or exceeds specification.
-
Measure the intake valve spring.
-
Measure the exhaust valve spring.
2. Use Valve/Clutch Spring Tester to check the valve springs for proper strength at the specified valve spring length. Replace the valve spring if it
does not meet or exceeds specification.
-
Measure the intake valve spring.
-
Measure the exhaust valve spring.
