Mountaineer V8-302 5.0L VIN P EFI (1998)
5. Pry the double support slides away from the insulators.
6. Remove the muffler. Slide the muffler forward over the rear axle while twisting the muffler until the muffler and tailpipe is removed.
INSTALLATION
1. Install the muffler and tailpipe assembly over the rear axle and twist the muffler into position.
2. Push the double support slides into the rubber insulators.
NOTE: Before installing the muffler into the rubber insulators, apply a soap solution to the support slides.
3. Push the rear support slide into the insulator.
4. Position the RH torsion bar and install the nut.
