Mountaineer V8-302 5.0L VIN P EFI (1998)
Blower Motor: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the speed control servo.
1
Disconnect the electrical connector.
2
Remove the bolt.
3
Position the speed control servo aside.
3. Remove the coolant/washer reservoir.
1
Remove the screws and the nuts.
2
Move the coolant/washer reservoir aside.
4. Remove the blower motor.
1
Disconnect the vent hose.
2
Disconnect the electrical connector.
3
Remove the screws.
4
Remove the blower motor.
