Mountaineer V8-302 5.0L VIN P EFI (1998)
Receiver Dryer: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2
Recover the refrigerant.
3. Disconnect the A/C cycling switch electrical connector.
4. Disconnect the suction accumulator/drier to A/C evaporator core fitting.
CAUTION: Use a back-up wrench to prevent damage to the tubes.
5. Disconnect the A/C manifold and tube spring lock coupling from the suction accumulator/drier.
6. Remove the suction accumulator/drier.
1
Remove the screw.
2
Remove the suction accumulator/drier.