mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Message Center|Page 11432 > < Diagram Information and Instructions|Page 11429
Page 1
background image

Driver/Vehicle Information Display: Description and Operation
Message Center

The message center consists of:

Message Center Switch Module

The message center switch module, has seven switches and is located below the message center indicator in the center console.

The message center switches are:

-

English/Metric mode.

-

Fuel Computer.
-

Range.

-

Status.

-

Economy.

-

Reset.

-

System Check and Warnings.

-

Oil Change Reset.

Display Dimming

The dimming of the indicator display is controlled by the pulse width dimmer module. The voltage on Pin 2 controls the brightness of the message center
display. When the exterior lamps are off, this voltage will be zero volts and the message center display will be at maximum brightness. When the
exterior lamps are on, this voltage will be controlled by the pulse width dimmer module and will be between 2.5 volts and battery voltage. The message
center display will be brighter as this voltage approaches battery voltage. If there is a warning on the message center display, the display will not dim to
its lowest level.

When the headlamps or parking lamps are OFF, the display of the message center indicator will be maximum brightness and the labels for the center five
switches of the message center switch module will not be illuminated.

When the headlamps or parking lamps are ON, the brightness of the display of the message center indicator and the labels for the center five switches of
the message center switch module will be controlled by the pulse width dimmer module.

Message Center|Page 11432 > < Diagram Information and Instructions|Page 11429