Mountaineer V8-302 5.0L VIN P EFI (1998)
1. Remove the safety belt guide bolt.
1
Remove the bolt cover.
2
Use Safety Belt Bolt Bit to remove the bolt.
2. Lift the floor carpet and use Safety Belt Bolt Bit to remove the floor anchor bolt.
3. Remove the B-pillar trim panel.
4. Remove the front safety belt retractor.
1
Use Safety Belt Bolt Bit to remove the bolts.
2
Remove the front safety belt retractor.
INSTALLATION
1. Use Safety Belt Bolt Bit to install the front safety belt retractor.
2. Install the B-pillar trim panel.