Mountaineer V8-302 5.0L VIN P EFI (1998)
8. Remove the screws and the digital TR sensor.
INSTALLATION
1. Install the digital Transmission Range (TR) sensor.
1
Position the digital TR sensor.
2
Loosely install the screws.
2. NOTE: The manual lever must be in neutral.
Align the digital TR sensor.
1
Install TR sensor Alignment Tool into the three slots on the digital TR sensor.
2
Tighten the screws.
3. Install the manual control outer lever.
1
Install the manual control outer lever.
2
Install the manual control outer lever nut.