Mountaineer V8-302 5.0L VIN P EFI (1998)
10. NOTE: Make sure the indicator needle is in spreader adapter hole.
Install the differential housing spreader and dial indicator with bracketry.
1
Install the differential housing spreader.
2
Install the dial indicator with bracketry and the Clutch Housing Alignment Adapter.
11. CAUTION: Over-spreading can cause damage to the axle housing.
Spread the axle housing.
1
Adjust the dial indicator to zero.
2
Tighten the spreader screw until the axle housing is spread.
3
Remove the dial indicator with bracketry and the Clutch Housing Alignment Adapter.
12. CAUTION: Wood blocks must be used to avoid axle housing damage.
NOTE: Keep the shims and bearing cups in order.
Remove the differential case from the axle housing.
1
Position the wood blocks.
2
Use two pry bars and push down on the pry bars.
3
Remove the differential case.
4
Remove a differential housing spreader and Housing Spreader Adapter Set.