Mountaineer V8-302 5.0L VIN P EFI (1998)
3. CAUTION: Do not allow the driveshaft to hang unsupported.
Disconnect the front driveshaft from the pinion flange, and position it aside.
1. Remove the bolts and the universal joint spider retainers.
2. Disconnect the front driveshaft from the pinion flange.
3. Position the front driveshaft aside.
4. Measure the pinion bearing preload.
-
Using a Nm (inch-pound) torque wrench, measure the torque required to maintain pinion rotation. Record the measurement.
5. Index-mark the pinion flange and the pinion stem.
6. Use the special tool to hold the pinion flange while removing the nut.
7. CAUTION: Place a drain pan under the differential housing.