Mountaineer V8-302 5.0L VIN P EFI (1998)
Remove the two axle shafts.
INSTALLATION
1. Lubricate the lip of the inner wheel bearing oil seal.
-
Use Premium Long-Life Grease XG-1-C or equivalent meeting Ford specification ESA-MlC75-B.
2. CAUTION: Once the differential pinion shaft has been removed, turning the differential case or an axle shaft will cause the differential pinion
gears to fall out of the assembly. This could result in chipped or damaged components.
Remove the differential pinion shaft.
1
Remove the differential pinion shaft lock bolt.
2
Remove the differential pinion shaft.
3. CAUTION: Do not damage the inner wheel bearing oil seal.
Install the two axle shafts.
4. CAUTION: Do not damage the rubber O-rings in the U-washer grooves.
