Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Alarm System Transponder: Service and Repair
Module-Passive Anti-Theft Transceiver
REMOVAL
1. Disconnect the battery ground cable.
CAUTION: Electronic modules are sensitive to electrical charges. If exposed to these charges, damage may result.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the ignition switch lock cylinder and turn to the RUN position.
2
Push the ignition switch lock cylinder release tab with a punch while pulling out the ignition switch lock cylinder.
3. Twist the tilt wheel handle and shank and remove.
4. Remove the upper and lower steering column shrouds.
1
Remove the screws.
2
Remove the upper and lower steering column shrouds.