Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Keyless Entry Key-Pad: Service and Repair
REMOVAL
1. Disconnect the battery ground cable.
2. Remove the front door trim panel.
CAUTION: Do not operate the radio chassis with a radio speaker disconnected.
3. Remove the screws and lift the radio speaker out to gain access to the electrical connector.
4. Disconnect the speaker wiring connector.
5. Disconnect the electrical connector.
-
Release harness pin-type retainers.
6. Remove the keyless entry keypad and harness.