Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Seat Cushion: Service and Repair
40% Portion of Rear 60/40 Split Bench
DISASSEMBLY
1. Disassemble the rear 40 percent seat. For additional information, refer to Seat-Rear, 60% Portion of 60/40 Split Bench.
2. Remove the rear seat legs.
1. Remove the pivot bolts.
2. Remove the rear seat legs.
3. Unhook the seat cushion trim cover J-clips.
4. Remove the seat cushion trim cover.
-
Separate the seat cushion trim cover from the hook and loop strip.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the
seat cushion foam.
