Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
5. Remove the seat cushion frame from the seat cushion foam.
6. Invert the seat cushion trim cover.
7. Remove the swing rods.
1
Remove and discard the hog rings.
2
Remove the swing rods.
8. Remove the seat cushion trim cover.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip or the hook and loop strip may be torn from the
seat cushion foam.
9. If equipped, and if necessary, remove the seat cushion heating element from the seat cushion foam.