Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Cruise Control Servo: Service and Repair
REMOVAL
1. Disconnect the speed control servo electrical connector.
2. Remove the speed control actuator cable cap from the speed control servo.
^
Push the locking arm on the speed control actuator cable cap then rotate the cap counterclockwise.
3. Disconnect the speed control core wire end from the speed control servo pulley.
1
Depress the spring retainer.
2
Slide the core wire end out of the speed control servo pulley.
4. Remove the speed control servo bracket bolt.