Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Air Door Actuator / Motor: Service and Repair
Blend Door Motor
REMOVAL
1. Remove the instrument panel. Refer to: " Body and Frame : Interior Trim : Dashboard/Instrument Panel : Service and Repair " See: Body
and Frame/Interior Moulding / Trim/Dashboard / Instrument Panel/Service and Repair
2. Remove the A/C electronic door actuator motor.
-
Remove the screws.
-
Disconnect the harness connector and remove the A/C electronic door actuator motor.
INSTALLATION
1. To install, reverse the removal procedure.
