Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
1. Remove the screws and disconnect the vacuum hose.
2. Rotate the vacuum control motor, disengage the lever, and remove the vacuum control motor.
CAUTION: Do not attempt to bend any part of the lever. It is brittle and will break.
INSTALLATION
1. To install, reverse the removal procedure.
Panel/Floor Door Vacuum Control Motor
REMOVAL
1. Remove the screws and disconnect the vacuum hose.
2. Rotate the vacuum control motor, disengage the lever, and remove the vacuum control motor.
CAUTION: Do Not attempt to bend any part of the lever. It is brittle and will break.
