Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Condenser HVAC: Service and Repair
REMOVAL
CAUTION: Installation of a new suction accumulator/drier is not required when repairing the air conditioning system except when there is physical
evidence of system contamination from a failed A/C compressor or damage to the suction accumulator/drier.
NOTE: If an A/C condenser core leak is suspected, the A/C condenser core must be leak tested before it is removed from the vehicle.
1. Perform the Refrigerant Discharging and Recovery Procedure.
2. Disconnect the A/C manifold and tube and the condenser to evaporator tube spring lock couplings from the A/C condenser core.
3. Remove the radiator. For additional information, refer to Cooling System.
4. Remove the condenser core bolt.
5. Squeeze to release the buckle.
