Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Dome Lamp: Service and Repair
Front Domelamp Assembly
REMOVAL
1. Disconnect the battery ground cable.
2. Use a thin bladed tool to carefully pry the dome lamp lens out.
^
Replace the bulb if necessary.
3. Remove the screws and lower the lamp assembly.
INSTALLATION
1. To install, reverse the removal procedure.
NOTE: When the battery is disconnected and reconnected, some abnormal drive symptoms may occur while the vehicle relearns its adaptive
strategy. The vehicle may need to be driven 16 km (10 mi) or more to relearn the strategy.
