Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
6. Disconnect the canister vent hose.
7. Remove the evaporative emission dust separator.
INSTALLATION
1. To install, reverse the removal procedure.
^
Leak test the evaporative emission system. For additional information, refer to Evaporative Emission System Leak Test. See: Testing and
Inspection/Component Tests and General Diagnostics/Component Tests/Evaporative Emission System Leak Test
^
Carry out the evaporative emission repair verification drive cycle. For additional information, refer to Evaporative Emission Repair
Verification Drive Cycle. See: Service and Repair