Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Fuel Injector Wiring Harness: Service and Repair
REMOVAL
1. Remove the upper intake manifold. For additional information, refer to Engine.
2. Disconnect the two transmission harness electrical connectors.
NOTE: Automatic transmissions have two harness connections, manual transmissions have only one.
3. Disconnect the two Heated Oxygen (HO2S) sensor electrical connectors.
4. Disconnect the engine bulkhead connector.
5. Disconnect the PCM electrical connector.
6. Disconnect the Crankshaft Position (CKP) sensor electrical connector.