Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Camshaft Position Sensor: Service Precautions
CAUTION:
^
Do not turn the camshaft during the removal and installation procedure or the fuel system timing will be out of time with the engine and possibly
cause engine damage
^
A special tool must be used during the installation of the replacement synchronizer assembly. Failure to follow this procedure will result in the fuel
system being out of time with the engine, possibly causing engine damage.
^
It is very important to coat the gear on the camshaft synchronizer with Super Premium SAE-5W-30 Motor Oil XO-5W30-DSP or equivalent
meeting Ford specification WSS-M2C153-G. Failure to do so could result in gear failure.