Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
20. Slide the swing rods out of the seat back trim cover.
21. Roll the seat back trim cover, in an inside out fashion, to the side air bag deployment chute.
CAUTION: Use care when separating the seat cushion trim cover from the hook and loop strip. The hook and loop strip can be torn from the seat
cushion foam.
22. Unzip the side air bag deployment chute.
23. Roll the seat back cover and side air bag deployment chute to completely expose the side air bag module and mounting bracket.
