Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
5. Tie-strap the side air bag module wire harness to the seat back frame.
6. Roll the seat back trim cover to position the deployment chute around the side air bag module.
7. Position the air bag deployment chute.
1
Insert the outboard side of the air bag deployment chute between the seat back pad and the side air bag module, pulling it around the outboard
side of the seat back frame.
2
Insert the inboard side of the air bag deployment chute between the seat back pad and the side air bag module from the inboard side of the seat
back.
WARNING:
^
CHECK THE SIDE AIR BAG DEPLOYMENT CHUTE AND ZIPPER FOR DAMAGE. THE DEPLOYMENT CHUTE AND
ZIPPER MUST NOT BE REPAIRED. IF THERE IS ANY DAMAGE TO THE DEPLOYMENT CHUTE OR ZIPPER THE SEAT
BACK TRIM COVER AND DEPLOYMENT CHUTE MUST BE INSTALLED NEW AS A UNIT.
^
IF THE AIR BAG DEPLOYMENT CHUTE IS NOT PROPELY POSITIONED AND COMPLETELY ZIPPED, THE SIDE AIR
BAG MAY NOT DEPLOY PROPERLY.
