Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Ignition Switch Lock Cylinder: Service and Repair
Ignition Lock Cylinder - Functional
Removal
1. Disconnect the battery ground cable and wait at least one minute.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key and turn to the RUN position.
2
Press the ignition switch lock cylinder release pin while pulling out the ignition switch lock cylinder.
Installation
1. Follow the removal procedure in reverse order.
^
Verify ignition switch lock cylinder operation.
2. Prove out the air bag system.
