Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
11. Open the glove compartment door to access the passenger air bag module mounting screws.
12. Remove the two screws.
13. CAUTION: Do not handle the passenger air bag module by grabbing the edges of the deployment door.
Reaching one hand into the glove box opening, push out on the passenger air bag module and separate it from the instrument panel.
14. Disconnect the electrical connector and remove the passenger air bag module.
15. Connect the restraint system diagnostic tool 418-F088 to the body harness side of the passenger air bag module electrical connector.
Vehicles equipped with seat side air bags
