Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Steering Column Lock: Service and Repair
Key Release Button
Removal
1. Disconnect the battery ground cable.
2. Remove the ignition switch lock cylinder.
1
Insert the ignition key into the ignition switch lock cylinder and turn to RUN position.
2
Push the ignition switch lock cylinder release tab with a punch while pulling out the ignition switch lock cylinder.
3. If equipped, remove the tilt wheel handle and shank.
4. Remove the upper and lower steering column shrouds.
1
Remove the screws.