Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
6. Loosen the Torsion Bar Tool until the tension is removed from the torsion bar.
7. Remove the torsion bar.
1
Mark the torsion bar and the adjuster for proper installation.
2
Remove the torsion bar insulator.
3
Grasp the torsion bar, and pull it free from the front suspension lower arm.
Installation
1. Position the torsion bar and the torsion bar adjuster.
2. Install the torsion bar adjuster.
1
Align the marks on the torsion bar and the torsion bar adjuster, then install the torsion bar adjuster.
2
Position the torsion bar insulator.
