Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Clutch Master Cylinder: Service and Repair
Special Tool(s)
Special Tool
Clutch Master Cylinder/Reservoir
Removal and Installation
1. Raise and support the vehicle.
2. Using the special tool, disconnect the hydraulic line from the clutch slave cylinder.
3. Lower the vehicle.
4. Disconnect the clutch pedal position (CPP) switch electrical connector.
5. Disconnect the clutch master cylinder rod from the clutch pedal arm. Remove and discard the clutch master cylinder push rod bushing.
