Mountaineer 2WD V6-245 4.0L VIN X SFI (2000)
Transmission Speed Sensor: Service and Repair
5R55E
Removal
1. Raise and support the vehicle.
2. Disconnect output shaft speed (OSS) sensor electrical connector.
3. Remove OSS sensor.
1. Remove the OSS sensor screw.
2. Remove the OSS sensor from the transmission.
-
Inspect the OSS sensor O-ring for damage. If damaged, replace the O-ring.
Installation
1. Inspect and lubricate O-ring with petroleum jelly.
1. Install the OSS sensor into the transmission.
2. Tighten OSS sensor screw.