Mountaineer 2WD V6-4.0L VIN K (2007)
4.
Remove the rear drain tube. Attach hose clip to existing hole for vehicle built after 8/14/2006. For all other vehicles attach the hose clip in the new
hole. (Figure 2)
5.
Install the updated drain tube.
6.
Attach the hose clip to the coat hook support bracket. (Figure 3)
NOTE
Make sure the drain hose is placed under the coat hook bracket. (Figure 3)
7.
Make sure there is no slack left in the hose as it leads up to the roof opening panel module. (Figure 3)
8.
Repeat procedure on opposite side.
9.
Install headliner following WSM, Section 501-05.
Parts Block
WARRANTY STATUS: Eligible Under Provisions Of New Vehicle Limited Warranty Coverage
IMPORTANT: Warranty coverage limits/policies are not altered by a TSB. Warranty coverage limits are determined by the identified causal part.
OPERATION
DESCRIPTION
TIME
072006A
2006-2007 Built Before
1.9 Hrs.
3/27/2007 With Roof
Opening Panel And Safety
Canopy: Install The
Updated Drain Tubes
