Mountaineer 2WD V6-4.0L VIN K (2007)
5. Remove the entertainment center support bracket (if equipped).
-
Remove the 7 bolts.
-
Remove the support bracket.
CAUTION: To avoid damage to the roof opening panel frame, be sure to support the roof opening panel frame when removing the frame
bolts.
6. Remove the 10 roof opening panel frame bolts.
-
To install, tighten to 6 Nm (53 lb-in).
7. Remove the roof opening panel frame.
8. To install, reverse the removal procedure.
-
Initialize the roof opening panel motor.
