mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Seat Recliner Motor|Page 8819 > < Seat Recliner Motor|Page 8817
Page 7
background image

Passenger Seat Cushion (Part 2)

Exploded View

Removal

WARNING:
-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an airbag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:
-

If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

1. Remove the front seat and depower the supplemental restraint system (SRS).
2. Remove the front seat backrest.
3. Remove the plastic rivets attaching the backrest trim cover to the inboard and outboard recliners.

Seat Recliner Motor|Page 8819 > < Seat Recliner Motor|Page 8817