Mountaineer 2WD V6-4.0L VIN K (2007)
11. Disconnect the backrest power feed electrical connector and route out the wire harness.
-
Release any wire harness retainers.
Passenger seat with heat
12. Disconnect the backrest heated seat mat electrical connector and route out the wire harness.
-
Release any wire harness retainers.
All seats
13. Release the pin-type retainers, disconnect and route out the side air bag module electrical connector and wire harness.
14. NOTE: Driver seat shown, passenger seat similar.
Release the side air bag wire harness pin-type retainers across the back of the cushion frame.
