mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Removal and Replacement|Page 9196 > < Removal and Replacement|Page 9194
Page 5
background image

Passenger Seat Cushion (Part 2)

Disassembly and Assembly

WARNING:

-

Always wear safety glasses when repairing an air bag supplemental restraint system (SRS) vehicle and when handling an air bag module.
This will reduce the risk of injury in the event of an accidental deployment.

-

The safety belt pretensioner is a pyrotechnic device. Always wear safety glasses when repairing an air bag equipped vehicle and when
handling a safety belt buckle pretensioner or safety belt retractor pretensioner. Never probe a pretensioner electrical connector. Doing so
could result in pretensioner or air bag deployment and could result in personal injury.

-

Never probe the connector on the air bag module. Doing so can result in air bag deployment, which can result in personal injury.

-

To reduce the risk of personal injury, do not use any memory saver devices.

NOTE:

-

If a seat equipped with a supplemental restraint system (SRS) component is being serviced, the SRS must be depowered.

-

The air bag warning lamp illuminates when the RCM fuse is removed and the ignition switch is ON. This is normal operation and does not indicate
a supplemental restraint system (SRS) fault.

-

The SRS must be fully operational and free of faults before releasing the vehicle to the customer.

Removal and Replacement|Page 9196 > < Removal and Replacement|Page 9194