Mountaineer 2WD V6-4.0L VIN K (2007)
9. Route the outboard recliner long cable, attach it to the kneeling mechanism inboard leg and attach all cable casing retainers.
10. Route the kneeling mechanism release cable, position the cable pivot at the inboard recliner and install the screw.
11. Install the cable to the kneeling mechanism outboard leg and cushion frame.
-
Attach the cable to the kneeling mechanism outboard leg release lever.
-
Position, turn and install the cable casing retainer at the inboard side of the kneeling mechanism outboard leg.
-
Attach any cable casing retainers.
12. Position the 2 latch foot covers and install the 2 screws.
13. Position the inner and outer covers around the kneeling mechanism outboard leg and install the 2 screws.
14. Position the inner and outer covers around the kneeling mechanism inboard leg and install the 2 screws.
15. Install the latch feet retracting link.
-
Position the spacer between the latch feet retracting link and inboard latch foot.
-
Install the bolt through the latch feet retracting link and spacer and into the inboard latch foot.
