mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

ABOUT US
ABS Sensor Block|Service and Repair|Page 5796 > < Diagram Information and Instructions|Page 5790

Mountaineer 2WD V6-4.0L VIN K (2007)

  • Brakes and Traction Control
  • Antilock Brakes / Traction Control Systems
  • ABS Sensor Block
  • Component Information
  • Service and Repair

Page 1
background image

ABS Sensor Block: Service and Repair

Stability Control Sensor Cluster 

Stability Control Sensor Cluster

Removal and Installation 

NOTE:  When installing a new stability control sensor cluster, the anti-lock brake system (ABS) module must be calibrated. Follow the scan tool
directions for the calibration procedures.

1. Remove the pin-type retainer and the driver side floor console finish panel.

2. Remove the 2 bolts, 2 nuts and the LH instrument panel brace.

  • Brakes and Traction Control
  • Antilock Brakes / Traction Control Systems
  • ABS Sensor Block
  • Component Information
  • Service and Repair

ABS Sensor Block|Service and Repair|Page 5796 > < Diagram Information and Instructions|Page 5790