Mountaineer 2WD V6-4.0L VIN K (2007)
2. NOTE: If the brake disc cannot be removed easily, apply rust penetrant on the brake disc-to-hub mating surfaces.
Remove the brake disc.
Installation
1. Clean any rust or foreign material from brake disc and wheel hub.
^
Use parts cleaner to clean the front brake disc and hub surfaces.
2. Apply a thin coat of anti-seize lubricant to the hub flange.
3. Install the brake disc.
4. Position the brake caliper, brake pads and brake caliper anchor plate assembly and install the 2 brake caliper anchor plate bolts.
^
Tighten to 165 Nm (122 ft. lbs.).
Disc Removal and Installation, Rear
Brake Disc
Material
