Mountaineer 2WD V6-4.0L VIN K (2007)
Water Pump: Service and Repair
Coolant Pump - 4.0L SOHC
Material
Removal and Installation
1. Drain the engine cooling system. For additional information, refer to Cooling System Draining, Filling and Bleeding.
2. Remove the cooling fan.
3. Remove the accessory drive belt.
4. Remove the bolts and the coolant pump pulley.
^
To install, tighten to 25 Nm (18 ft. lbs.).
5. Release the clamp and disconnect the coolant pump bypass hose.
6. Release the clamp and disconnect the heater hose.
7. Release the clamp and disconnect the lower radiator hose.
8. Remove the bolts, the coolant pump and the gasket.