Mountaineer 2WD V6-4.0L VIN K (2007)
Camshaft Lobe Lift
Camshaft Lobe Lift
Special Tools
1. Use the special tool to measure camshaft intake/exhaust lobe lift.
^
Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading to figure the camshaft lobe lift.
Camshaft Runout
Camshaft Runout
Special Tool(s)
1. NOTE: Camshaft journals must be within specifications before checking runout.
Use the special tool to measure the camshaft runout.
^
Rotate the camshaft and subtract the lowest indicator reading from the highest indicator reading.
^
If out of specification, install new components as necessary.
