Mountaineer 2WD V6-4.0L VIN K (2007)
Air Door Actuator / Motor: Service and Repair
Auxiliary Temperature Blend Door Actuator
AUXILIARY TEMPERATURE BLEND DOOR ACTUATOR
Removal and Installation
1. With the vehicle in NEUTRAL, position it on a hoist.
2. Remove the LH quarter trim panel.
3. Remove the 2 auxiliary line floorpan bracket nuts.
-
To install, tighten to 8 Nm (71 lb-in).
4. Remove the 2 auxiliary heater core and evaporator core housing bolts.