mercury Workshop Repair Guides

Mercury Workshop Service and Repair Manuals

Procedures|Page 9538 > < Initial Inspection and Diagnostic Overview|Page 9535
Page 1
background image

Driver/Vehicle Information Display: Procedures

Message Center Cluster

OIL LIFE RESET - MESSAGE CENTER CLUSTER

NOTE:  The oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days.

1. Press and release the SETUP button until the message center displays PRESS RESET TO BEGIN SYSTEM CHECK.
2. Press and release the RESET button until the message center displays HOLD RESET IF NEW OIL.
3. Press and hold the RESET button for 2 seconds and release to reset the oil life to 100%.
4. The message center displays SETUP MENU HOLD RESET.

Base Instrument Cluster

OIL LIFE RESET - BASE INSTRUMENT CLUSTER

NOTE:  Oil life calculation is set at a maximum of approximately 8,000 km (5,000 miles) or 180 days.

1. Press and release the TRIP/RESET button until the message center displays SETUP MENU HOLD RESET.
2. Press and hold the TRIP/RESET button for 2 seconds until the message center displays RESET FOR SYSTEM CHECK.
3. Press and hold the TRIP/RESET button for 2 seconds until the message center displays OIL LIFE xx% RESET IF NEW.
4. Press and release the TRIP/RESET button until the message center displays HOLD RESET IF NEW OIL.
5. Press and hold the TRIP/RESET button for 2 seconds and release to reset the oil life to 100%.
6. Message center briefly displays OIL CHANGE SET TO 100%.

Message Center Cluster

OIL LIFE START VALUE - MESSAGE CENTER CLUSTER

NOTE:  The oil life start value is used to reset the oil life value back to the maximum of approximately 8,000 km (5,000 miles) if the value was
previously changed or to lower the value from the maximum (8,000 km [5,000 miles]) in 10% increments down to 10%.

1. Press and release the SETUP button until the message center displays OIL LIFE START VALUE SET TO XX%.
2. Press and release the RESET button to lower the percentage by 10% (down to 10%) for each button press or return the value to 100%.

Base Instrument Cluster

OIL LIFE START VALUE - BASE INSTRUMENT CLUSTER

NOTE:  The oil life start value is used to reset the oil life value back to the maximum of approximately 8,000 km (5,000 miles) if the value was
previously changed or to lower the value from the maximum (8,000 km [5,000 miles]) in 10% increments down to 10%.

1. Press and release the TRIP/RESET button until the message center displays SETUP MENU HOLD RESET.
2. Press and hold the TRIP/RESET button for 2 seconds until the message center displays RESET FOR SYSTEM CHECK.
3. Press and release the TRIP/RESET button until the message center displays OIL LIFE SET TO XX%.
4. Press and hold the TRIP/RESET button for 2 seconds to lower the percentage by 10% (down to 10%) for each button press-and-hold or return the

value to 100%.

Procedures|Page 9538 > < Initial Inspection and Diagnostic Overview|Page 9535