Mountaineer 2WD V6-4.0L VIN K (2007)
9. Attach the restraint system diagnostic tools to the clockspring electrical connectors at the top of the steering column.
10. Open and lower the glove compartment door.
11. Detach the wiring retainer, remove the 4 bolts and the passenger air bag module heat shield.
12. NOTE: Deactivate the passenger air bag module as shown, the canister vent and adaptive tether squibs do not require deactivation.
Through the glove compartment opening, disconnect the LH side passenger air bag module electrical connector.
13. Attach the restraint system diagnostic tool to the vehicle harness side of the passenger air bag module electrical connector on the LH side.
