Mountaineer 2WD V6-4.0L VIN K (2007)
Transmission Speed Sensor: Service and Repair
Intermediate Shaft Speed Sensor
Intermediate Shaft Speed Sensor
Removal
All vehicles
1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to Maintenance/Service and Repair.
Four wheel drive (4WD) vehicles
2. Disconnect the front driveshaft from the transfer case.
3. Disconnect the front driveshaft from the front differential.
4. Remove the front driveshaft from the vehicle.
All vehicles
5. Remove the cable shield by prying on the side of the shield closest to the boot, then sliding the shield away from the boot.